We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412011199
Description
Standardization | ISO 15407-1 |
Type | MS01-AL test block, variant II, with 5/2-directional valve |
Version | 1x |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Protection class | IP65 |
Port size | form C |
Type | Plug |
Compressed air connection input | 3/8 NPT |
Compressed air connection output | 1/4 NPT |
DC operating voltage | 24 V |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412011199, call FAMAGA, the world's main producer of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are symbolized in the quality of merchandises and special attention to each consumer. We value everyone, who joined with us - so, our regular customers obtain the most flexible purchase terms and discounts on the industrial equipment market. At this time, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 600 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Jamaica, Morocco, Latvia, New Zealand, Egypt, Myanmar, Belgium, Sierra Leone, Cuba, Austria, Nicaragua, Qatar, Guyana, Kyrgyzstan, Dominica, Montenegro, Pakistan, Djibouti, Sudan, Japan, Bolivia, Romania, Denmark, Cyprus, Peru, Georgia, Albania, Finland, Seychelles, The Bahamas, Kuwait, El Salvador, Swaziland, Costa Rica, Ireland, United States, Central African Republic, Mozambique, Brunei, Switzerland, Jordan, Panama, Poland, Luxembourg, Nigeria, Belarus, Antigua and Barbuda. A well-developed logistics link and a partnership network let us to dispatch our elements anywhere in the planet with no delay without compromising product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only experts, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are guaranteed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is rising every day. We are proud that users choose FAMAGA again and again, and we are glad to make more developed and technologically innovative industrial equipment so as to stay on the top.
To ask a question or order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Grid dimension | 27,1 mm |
Standards | ISO 15407-1 26 mm |
Working pressure min./max. | 4 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
DC operating voltage | 24 V |
Voltage tolerance DC | -10% / +10% |
Protection class With valve plug connector | IP65 |
Duty cycle | 100 % |
Electrical connection for valve | Plug, form C |
Electr. connection | Plug, M12, 5-pin |
Valve voltage tolerance | -10% / +10% |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pressure regulator is preset at 3 bar . Expansion options available for pilot valves. |
Material |
---|
End plates | Aluminum |
Seal | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |