We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412011198
Description
Standardization | ISO 15407-1 |
Type | MS01-AL test block, variant II, with 5/2-directional valve |
Version | 8x |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Protection class | IP65 |
Port size | form C |
Type | Plug |
Compressed air connection input | G 3/8 |
Compressed air connection output | G 1/4 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412011198, make contact with FAMAGA, the world's top supplier of industrial equipment. Our company has existed for more than ten years - these are years of experience, which are represented in the quality of spare parts and individual attention to each client. We praise everyone, who collaborated with us - hence, our regular purchasers receive the most favorable purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such customers, and we constantly sign new agreements. More than 750 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Cameroon, New Zealand, Ghana, Suriname, Slovakia, Papua New Guinea, Colombia, Tajikistan, France, Afghanistan, Liechtenstein, Andorra, Turkmenistan, Mozambique, Uganda, Indonesia, Mali, Kiribati, Mauritius, Liberia, Ukraine, Malawi, Panama, Denmark, Laos, Tunisia, Zambia, Lithuania, Libya, Uzbekistan, Iran, Burundi, Thailand, Algeria, Brazil, Moldova, Dominica, Czech Republic, Senegal, Kenya, The Gambia, Eswatini, Kyrgyzstan, Iceland, Luxembourg, Hungary, Georgia. A well-shaped logistics connection and a partnership network allow us to deliver our goods anywhere in the earth immediately without damaging product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the range of machine made streamlined equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is increasing every day. We are pleased that customers choose FAMAGA again and again, and we are eager to make more progressive and technologically advanced industrial equipment so as keep on top of it.
To inquire or make a request, contact us or write to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Grid dimension | 27,1 mm |
Standards | ISO 15407-1 26 mm |
Working pressure min./max. | 4 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
DC operating voltage | 24 V |
Voltage tolerance DC | -10% / +10% |
Protection class With valve plug connector | IP65 |
Duty cycle | 100 % |
Electrical connection for valve | Plug, form C |
Electr. connection | Plug, M12, 5-pin |
Valve voltage tolerance | -10% / +10% |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pressure regulator is preset at 3 bar . Expansion options available for pilot valves. |
Material |
---|
End plates | Aluminum |
Seal | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |