We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226744750
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 75 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5226744750, reach FAMAGA, the world's primary provider of manufacturing equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of products and particular attention to each consumer. We esteem everyone, who collaborated with us - thus, our regular customers procure the most favorable purchase conditions and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such consumers, and we constantly make new agreements. More than 600 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Nicaragua, Eswatini, Cambodia, Macedonia, Namibia, Burundi, Poland, Mexico, Algeria, Eritrea, Iraq, Laos, Ecuador, China, Bhutan, Bolivia, Saudi Arabia, Norway, Cameroon, Comoros, Montenegro, Cape Verde, Slovakia, Togo, Rwanda, Samoa, Afghanistan, Belize, Kiribati, Malta, Greece, Zimbabwe, Sierra Leone, Peru, Andorra, Armenia, Paraguay, India, Antigua and Barbuda, Jamaica, Iceland, Australia. A well-shaped logistics bond and a partnership network cheer us to dispatch our units anywhere in the planet on-time without compromising product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only experts, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is ascending every day. We are happy that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To consult or book, contact us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders can be generated in the Internet configurator. ATEX ID: II 2G c IIB T4 II 2D c IP65 T125°C X The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |