We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226636900
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 290 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 5226636900, reach FAMAGA, the world's leading distributor of industrial equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of products and personalseparate attention to each client. We esteem everyone, who cooperated with us - therefore, our regular purchasers procure the most helpful purchase conditions and discounts on the industrial equipment market. At present, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Côte d\'Ivoire, Cyprus, Zambia, Argentina, Paraguay, Kenya, Nepal, Portugal, Dominica, Malawi, Georgia, Chad, Israel, Tanzania, Ireland, Canada, Oman, Botswana, Tunisia, Greece, India, Sweden, Equatorial Guinea, Guatemala, Bulgaria, Benin, Iran, Mozambique, Gambia, Syria, Norway, Cameroon, Moldova, Armenia, Czech Republic, Tonga, Andorra, Burkina Faso, Mongolia, Niger, Burundi, Central African Republic, Jordan, Brazil, Macedonia, China, Chile, Jamaica. A advanced logistics system and a partnership network allow us to ship our units anywhere in the earth quickly without disreputing product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We call into our team only experts, who already have experience in the direction of industrial equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is growing every day. We are proud that users choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |