We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226622650
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 265 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 5226622650, reach FAMAGA, the world's prime supplier of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of products and individual attention to each purchaser. We understand everyone, who cooperated with us - therefore, our regular customers accept the most favorable purchase terms and discounts on the manufacturing equipment market. Now, there are more than 4000 such buyers, and we constantly sign new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Peru, Rwanda, Austria, Central African Republic, Mali, Lesotho, Palestine, Dominican Republic, Belgium, Antigua and Barbuda, Djibouti, Cameroon, Thailand, Guinea, Lithuania, Latvia, Russia, El Salvador, Comoros, Kiribati, Czech Republic, Brazil, Liberia, Azerbaijan, Madagascar, Algeria, Mexico, Chad, Morocco, North Korea, Ecuador, Greece, India, Kazakhstan, Niger, New Zealand, Iceland, Mongolia, Swaziland, Hungary, Montenegro, Kenya, Jamaica, Ukraine, Ghana, Argentina, Ireland, Senegal, China. A advanced logistics connection and a partnership network let us to send our items anywhere in the world promptly without discrediting product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of industrial equipment.
All products from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To consult or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |