We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226610650
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 65 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 5226610650, call FAMAGA, the world's prime company of streamlined equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of items and private attention to each user. We esteem everyone, who conspired with us - thus, our regular clients receive the most attractive purchase terms and discounts on the machine made streamlined equipment market. At present, there are more than 3500 such purchasers, and we constantly compose new agreements. More than 700 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Slovakia, Yemen, Suriname, Papua New Guinea, Lesotho, Poland, Singapore, Monaco, The Bahamas, Switzerland, Mali, Togo, Haiti, Malawi, Burkina Faso, Central African Republic, Denmark, Eswatini, Australia, Botswana, Kuwait, Mexico, Georgia, Qatar, Uganda, Fiji, New Zealand, The Gambia, Bosnia and Herzegovina, China, Cyprus, South Korea, Benin, Sweden, Afghanistan, Guyana, Guatemala, Egypt, Algeria, Indonesia, Syria, Finland, Ukraine, Samoa, Dominica, Seychelles, Paraguay, Mauritius, Namibia. A well-shaped logistics series and a partnership network let us to conduct our items anywhere in the planet with no delay without damaging product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the sphere of factory-made equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is ascending every day. We are pleased that users choose FAMAGA again and again, and we are glad to make more exceptional and technologically modern industrial equipment so as stay in control.
To get some advice or order, contact us or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |