We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822382001
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 10 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822382001, reach FAMAGA, the world's influential producer of streamlined equipment. Our company has functioned for more than ten years - these are ages of experience, which are illustrated in the quality of outputs and special attention to each consumer. We esteem everyone, who joined with us - therefore, our regular consumers obtain the most convenient purchase terms and discounts on the factory-made equipment market. Today, there are more than 4000 such consumers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the world Germany, United Kingdom, Poland, New Zealand, Sudan, Guinea, Papua New Guinea, Austria, Liberia, Azerbaijan, India, Guatemala, Nigeria, Slovenia, The Bahamas, Libya, Costa Rica, Bolivia, Togo, Syria, Niger, Central African Republic, Bulgaria, Tonga, Norway, Haiti, Jordan, East Timor, North Korea, Turkmenistan, Mongolia, Kenya, Paraguay, Slovakia, Equatorial Guinea, Senegal, Belize, Israel, Rwanda, Ecuador, Iran, Iraq, Argentina, Estonia, Moldova, Algeria, Ghana, Indonesia, Bosnia and Herzegovina, Egypt. A well-elaborated logistics bond and a partnership network assist us to send our items anywhere in the planet on-time without discrediting product quality.
A specific source of pride for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are glad that consumers choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, call us by phone or send a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |