We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822332451
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 10 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822332451, reach FAMAGA, the world's main producer of industrial equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of merchandises and particular attention to each orderer. We cherish everyone, who worked with us - therefore, our regular purchasers get the most convenient purchase terms and discounts on the machine made streamlined equipment market. At present, there are more than 4500 such clients, and we constantly make new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Latvia, Equatorial Guinea, San Marino, Singapore, Turkey, Ecuador, Tunisia, Honduras, Zambia, Poland, Greece, Romania, El Salvador, Bulgaria, Burma, Luxembourg, Serbia, Tajikistan, Kyrgyzstan, Iraq, New Zealand, Kenya, Armenia, Liberia, Saudi Arabia, Norway, Namibia, Nigeria, Senegal, Czech Republic, Turkmenistan, Uruguay, Malta, Jordan, Austria, Kazakhstan, Cameroon, Bangladesh, The Gambia, Hungary, Samoa, Israel, Georgia, Iran, Morocco, Tonga, Mozambique. A well-shaped logistics network and a partnership network help us to conduct our items anywhere in the planet immediately without disreputing product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are verified - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this bulk is ascending every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as keep on top of it.
To consult or book, call us by phone or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |