We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1823390016
Description
Number of valve positions | 2 |
Subbase | Aluminum |
Compressed air connection input | G 1/4 |
For series | ST |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 1823390016, make contact with FAMAGA, the world's chief company of industrial equipment. Our company has existed for more than ten years - these are cycles of experience, which are expressed in the quality of items and particular attention to each customer. We value everyone, who cooperated with us - hence, our regular clients bring in the most attractive purchase conditions and discounts on the factory-made equipment market. At present, there are more than 4500 such customers, and we constantly compose new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Gabon, Qatar, Albania, Moldova, Kazakhstan, Djibouti, Sweden, Costa Rica, Panama, Papua New Guinea, Uganda, Serbia, Fiji, Russia, Belarus, Comoros, Uzbekistan, El Salvador, Yemen, Eritrea, Nicaragua, Vietnam, Cameroon, Lithuania, Nepal, Libya, Zimbabwe, Ghana, East Timor, Brazil, Egypt, Haiti, Brunei, Sudan, Pakistan, China, Benin, Equatorial Guinea, Latvia, Indonesia, The Gambia, Mauritania. A well-elaborated logistics system and a partnership network assist us to conduct our units anywhere in the planet as soon as possible without damaging product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of manufacturing equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is amounting every day. We are happy that users choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To request or book, phone us or write to the online chat on our site. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Working pressure min./max. | 0 ... 10 bar |
Ambient temperature min./max. | 0 ... 80 °C |
Medium temperature min./max. | 0 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Grid dimension | 18 mm |
Direction of pneumatic port (1) | On the side |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Base plate | Aluminum |