We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480193174
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 400 mm |
Scraper | Polyester |
ATEX optional | |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480193174, make contact with FAMAGA, the world's top producer of streamlined equipment. Our company has functioned for more than ten years - these are cycles of experience, which are illustrated in the quality of goods and special attention to each consumer. We praise everyone, who collaborated with us - hence, our regular consumers procure the most acceptable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such purchasers, and we constantly sign new agreements. More than 750 contracts are concluded per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Myanmar, India, Slovakia, Seychelles, Suriname, Greece, Sri Lanka, Slovenia, France, Burma, Nigeria, Chad, Lebanon, Brazil, North Korea, Andorra, Ghana, Iran, Denmark, Sudan, Guyana, Mongolia, Bolivia, Belarus, Iraq, Kuwait, Sweden, Belize, Comoros, Austria, Jamaica, Bangladesh, Antigua and Barbuda, Israel, Mali, Kyrgyzstan, Malta, Uruguay, Uganda, Tanzania, Kazakhstan. A well-built logistics link and a partnership network allow us to dispatch our units anywhere in the planet immediately without disreputing product quality.
A specific source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of manufacturing equipment.
All goods from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically innovative industrial equipment so as keep on top of it.
To consult or book, contact us or write to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is PTFE. |
Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized Die-cast aluminum, anodized |
End cover | Aluminum, anodized Die-cast aluminum, anodized |
Scraper | Polyester |
Tie-rods | Stainless steel |