We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822060700
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Stroke | 10 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822060700, call FAMAGA, the world's prime supplier of industrial equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of merchandises and special attention to each orderer. We value everyone, who conspired with us - therefore, our regular buyers pick up the most attractive purchase forms and discounts on the industrial equipment market. Today, there are more than 3500 such buyers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Kyrgyzstan, Uruguay, Haiti, Malawi, Burma, Bulgaria, Fiji, Burundi, Malta, Guinea, Libya, Liberia, Cameroon, Australia, Netherlands, Mali, Argentina, Bhutan, The Bahamas, Uzbekistan, Moldova, Jamaica, Togo, Austria, Belarus, Dominica, Jordan, North Korea, Nigeria, Zimbabwe, Bosnia and Herzegovina, Finland, Laos, Bangladesh, Senegal, Equatorial Guinea, Greece, Tanzania, Bolivia, Niger, Georgia. A well-developed logistics system and a partnership network guide us to dispatch our elements anywhere in the world on-time without discrediting product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are pleased that users choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as stay in control.
To ask a question or place an order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |