Aventics (brand of Emerson) 0822065103
  Aventics (brand of Emerson) 0822065103

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822065103 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822065103

Description

Functional principle double-acting
Cushioning elastic
Magnetic piston with magnetic piston
Piston diameter 40 mm
Stroke 100 mm
Housing Aluminum
Sealing material Polyurethane
Compressed air connection G 1/8

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822065103

If you are pursuing Aventics (brand of Emerson) 0822065103, catch up with FAMAGA, the world's chief producer of machine made equipment. Our company has operated for more than ten years - these are cycles of experience, which are illustrated in the quality of outcomes and private attention to each consumer. We appreciate everyone, who engaged with us - therefore, our regular clients receive the most acceptable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such clients, and we constantly compose new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the world . A well-shaped logistics link and a partnership network assist us to dispatch our goods anywhere in the world promptly without damaging product quality.

A particular source of good name for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the field of factory-made equipment.

All products from FAMAGA are verified - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are happy that buyers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.

To inquire or order, get in touch with us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.

Features 0822065103

Working pressure min./max. See table
Ambient temperature min./max. -10 ... 70 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants.
Material
Housing Aluminum, anodized
Seal Polyurethane
Front plate Steel, galvanized
Guide rod Steel, hardened
Bearing Steel, hardened
Piston rod Stainless steel