We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412006200
Description
| Parts | Filter pressure regulator |
| Condensate drain | semi-automatic, open without pressure |
| Relieving exhaust | with relieving air exhaust |
| filter porosity | 5 µm |
| Pressure gauge | with pressure gauge |
| lockable | lockable |
| Housing | Polyamide |
| Reservoir | Polycarbonate |
| Sealing material | Acrylonitrile butadiene rubber |
| suitable for ATEX | |
| Nominal flow Qn | 2100 l/min |
| Compressed air connection | G 1/4 |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) R412006200, get in touch with FAMAGA, the world's key retailer of streamlined equipment. Our company has existed for more than ten years - these are years of experience, which are expressed in the quality of spare parts and private attention to each customer. We value everyone, who cooperated with us - thus, our regular clients bring in the most desirable purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 3500 such clients, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Suriname, Italy, Jamaica, Zimbabwe, Tanzania, Togo, Luxembourg, Angola, Dominica, Estonia, Canada, Malta, South Sudan, Mexico, Latvia, Andorra, The Gambia, Madagascar, Armenia, Moldova, East Timor, Thailand, El Salvador, Djibouti, Serbia, Belarus, Cyprus, United Arab Emirates, Czech Republic, Poland, Malaysia, Tajikistan, Panama, Comoros, Pakistan, Argentina, Brunei, India. A well-shaped logistics series and a partnership network allow us to dispatch our goods anywhere in the planet promptly without damaging product quality.
A special source of repute for FAMAGA is its team members, each of whom contributes to our work. We request into our team only experts, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are pleased that consumers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as stay in control.
To inquire or book, contact us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| Version | 1-part, Can be assembled into blocks |
| Parts | Filter pressure regulator |
| Mounting orientation | vertical |
| Certificates | suitable for ATEX |
| Working pressure min./max. | 1,5 ... 16 bar |
| Ambient temperature min./max. | -10 ... 50 °C |
| Medium temperature min./max. | -10 ... 50 °C |
| Medium | Compressed air Neutral gases |
| Regulator type | Diaphragm-type pressure regulator |
| Regulator function | with relieving air exhaust |
| Adjustment range min./max. | See table |
| Pressure supply | single |
| Filter reservoir volume | 28 cm³ |
| Filter element | exchangeable |
| Weight | See table |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
| Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
| Material |
|---|
| Housing | Polyamide |
| Front plate | Acrylonitrile butadiene styrene |
| Seals | Acrylonitrile butadiene rubber |
| Threaded bushing | Die cast zinc |
| Reservoir | Polycarbonate Die cast zinc |
| Protective guard | Polyamide |
| Filter insert | Polyethylene |
