We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R414009647
Description
Housing | Die-cast aluminum,Steel |
Sealing material | Hydrogenated acrylonitrile butadiene rubber |
CE declaration of conformity | |
Protection class | IP65 |
Number of wires | 5-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 1300 l/min |
Hysteresis | < 0.015 bar |
DC operating voltage | 24 V |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R414009647, reach FAMAGA, the world's leading producer of industrialized equipment. Our company has existed for more than ten years - these are cycles of experience, which are expressed in the quality of goods and personalseparate attention to each purchaser. We appreciate everyone, who worked with us - so, our regular buyers accept the most favorable purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Belgium, Russia, Samoa, Guyana, Slovakia, South Korea, Mexico, Peru, Gambia, Slovenia, Comoros, Mali, Estonia, Lebanon, Bhutan, Moldova, Albania, Japan, Libya, Australia, El Salvador, Serbia, Poland, Afghanistan, Syria, Ireland, Egypt, Iraq, Costa Rica, Benin, Nigeria, Guatemala, Tajikistan, Yemen, Iran, Malaysia, Czech Republic. A well-developed logistics connection and a partnership network let us to ship our products anywhere in the world immediately without discrediting product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of manufacturing equipment.
All products from FAMAGA are ensured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To ask a question or book, phone us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Poppet valve |
Mounting orientation | α = 0 ... 90° ±β = 0 ... 90° |
Certificates | CE declaration of conformity |
Working pressure max | See table |
Ambient temperature min./max. | 5 ... 50 °C |
Medium temperature min./max. | 5 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 1 mg/m³ |
Nominal flow Qn | 1300 l/min |
Control | Analog |
DC operating voltage | 24 V |
Voltage tolerance DC | -20% / +30% |
Permissible ripple | 5% |
Max. power consumption | 1400 mA |
Protection class | IP65 |
Weight | 2,05 kg |
Nominal flow Qn with working pressure 7 bar , with secondary pressure 6 bar and Δp = 0.2 bar |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With oil-free, dry air, other installation positions are possible on request. The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions. Minimum working pressure = 0.5 bar + max. required secondary pressure Additional pressure setting ranges available on request |
Material |
---|
Housing | Die-cast aluminum Steel |
Seals | Hydrogenated acrylonitrile butadiene rubber |