We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822498102
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M16 |
Standardization | NFE 49004 |
Stroke | 15 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822498102, contact FAMAGA, the world's dominant producer of machine made equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of goods and individual attention to each consumer. We praise everyone, who joined with us - thus, our regular clients procure the most desirable purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 4500 such buyers, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the earth Germany, United Kingdom, Guatemala, Senegal, Burma, Papua New Guinea, Denmark, Malta, Oman, Mexico, Guyana, Qatar, Turkmenistan, Grenada, Egypt, Burkina Faso, Uzbekistan, Jordan, Georgia, Liechtenstein, Libya, Kyrgyzstan, Namibia, Turkey, North Korea, El Salvador, China, Czech Republic, Albania, Vietnam, Ukraine, Kazakhstan, Brazil, Afghanistan, Norway, Cameroon, Kiribati, Yemen, Chile, Rwanda, Uganda, Mali. A well-developed logistics connection and a partnership network let us to conduct our goods anywhere in the globe as soon as possible without damaging product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All goods from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are glad that customers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, get in touch with us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |