We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822490300
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M8 |
Standardization | NFE 49004 |
Stroke | 5 mm |
Sealing material | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822490300, catch up with FAMAGA, the world's principle provider of mechanized equipment. Our company has operated for more than ten years - these are cycles of experience, which are outlined in the quality of outputs and private attention to each orderer. We understand everyone, who liased with us - so, our regular consumers get the most convenient purchase forms and discounts on the machine made streamlined equipment market. At present, there are more than 4500 such consumers, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the earth Germany, United Kingdom, Egypt, Turkey, Guinea, Slovenia, Eswatini, North Korea, Singapore, Afghanistan, Nicaragua, Cyprus, Liechtenstein, Malawi, Mauritania, South Korea, Turkmenistan, Antigua and Barbuda, Jamaica, Azerbaijan, Paraguay, Czech Republic, Argentina, Thailand, Tonga, Angola, Cape Verde, Libya, Finland, Switzerland, Macedonia, Ghana, Niger, Latvia, Kenya, Malta, India, Swaziland, Hungary, Kyrgyzstan, Bangladesh, Namibia. A well-built logistics network and a partnership network let us to send our elements anywhere in the earth on-time without compromising product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are glad that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as to stay on the top.
To get some advice or book, call us by phone or write a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |