We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822490200
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M8 |
Standardization | NFE 49004 |
Stroke | 5 mm |
Sealing material | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822490200, get in touch with FAMAGA, the world's primary company of streamlined equipment. Our company has progressed for more than ten years - these are years of experience, which are illustrated in the quality of items and personalseparate attention to each user. We respect everyone, who joined with us - thus, our regular customers pick up the most flexible purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4 thousand such customers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Slovakia, Swaziland, Oman, Belgium, United Arab Emirates, Malaysia, Grenada, Kazakhstan, Liechtenstein, Denmark, Fiji, Eritrea, Chile, Rwanda, Nicaragua, Georgia, Cameroon, South Sudan, Mexico, Seychelles, United States, Kuwait, Qatar, Jordan, Armenia, Comoros, Lithuania, Kenya, Djibouti, Madagascar, Egypt, Ghana, Bolivia, Croatia, Cape Verde, Thailand, Burkina Faso, Mozambique, East Timor, Benin. A well-developed logistics series and a partnership network allow us to conduct our goods anywhere in the planet promptly without damaging product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are happy that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as stay in control.
To consult or place an order, contact us or write to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |