Aventics (brand of Emerson) 0822390200
  Aventics (brand of Emerson) 0822390200

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822390200 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822390200

Description

Piston rod modification Optionally through (hollow)
Functional principle double-acting
Cushioning elastic
Magnetic piston with magnetic piston
Piston diameter 16 mm
Piston rod thread M8
Standardization NFE 49004
Stroke 5 mm
Sealing material Nitrile butadiene rubber
Scraper Polyurethane
ATEX optional
Compressed air connection M5
Compressed air connection type Internal thread
Temperature resistance Optionally heat-resistant

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822390200

If you are inspecting Aventics (brand of Emerson) 0822390200, contact FAMAGA, the world's central provider of industrial equipment. Our company has existed for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each client. We appreciate everyone, who engaged with us - therefore, our regular consumers get the most favorable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 4500 such buyers, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the earth . A well-elaborated logistics system and a partnership network allow us to send our goods anywhere in the earth with no delay without compromising product quality.

A special source of honor for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of factory-made equipment.

All products from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are glad that buyers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as not to lower the bar.

To get some advice or order, call us by phone or write to the online chat on our official website. You can also send a list of the needful equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.

Features 0822390200

Standards NFE 49004
Certificates ATEX optional
Compressed air connection Internal thread
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Aluminum
End cover Aluminum
Seal Nitrile butadiene rubber Polyurethane
Nut for piston rod Steel, galvanized
Scraper Polyurethane