We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5812763160
Description
Standardization | ISO 5599-1 |
Cable length | 0.5 m |
Frame size | ISO 2 |
Switching principle | 5/3 |
Version | Spool valve |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber |
Protection class | IP67 |
Number of wires | 3-pin |
Type | Plug |
Nominal flow Qn | 2100 l/min |
Compressed air connection input | Base plate ISO 5599-1 |
Compressed air connection output | Base plate ISO 5599-1 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 5812763160, make contact with FAMAGA, the world's dominant distributor of industrial equipment. Our company has worked for more than ten years - these are ages of experience, which are symbolized in the quality of products and individual attention to each client. We value everyone, who conspired with us - thus, our regular buyers procure the most attractive purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such consumers, and we constantly form new agreements. More than 750 affairs are settled per day, because FAMAGA works all over the world Germany, United Kingdom, Myanmar, Gambia, East Timor, Benin, El Salvador, Czech Republic, Dominica, Brunei, Japan, Tonga, Colombia, Pakistan, Senegal, Comoros, North Korea, Swaziland, Bangladesh, Costa Rica, Suriname, Albania, Russia, Angola, Samoa, Madagascar, Mozambique, South Sudan, Tajikistan, Luxembourg, Tanzania, Nigeria, Belarus, Eswatini, Bolivia, Latvia, Egypt, Montenegro, Djibouti, Cyprus, Peru, Central African Republic, Mexico, Indonesia, Jamaica, Poland. A advanced logistics system and a partnership network assist us to dispatch our units anywhere in the earth on-time without compromising product quality.
A specific source of good name for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only experts, who already have experience in the direction of factory-made equipment.
All goods from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this quantity is growing every day. We are glad that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically innovative industrial equipment so as stay in control.
To consult or make a request, contact us or write to the online chat on our official website. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve |
Sealing principle | Soft sealing |
Blocking principle | Single base plate principle |
Connection type | Plate connection |
Standards | ISO 5599-1, ISO 2 |
Working pressure min./max. | See table |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 2100 l/min |
Flow conductance C | 8,9 l/(s*bar) |
Protection class with connection | IP67 |
Protective circuit | Z-diode |
Reverse polarity protection | Protected against polarity reversal |
LED status display | Green |
Duty cycle | 100 % |
Typ. switch-on time | 14 ms |
Typ. switch-off time | 28 ms |
Mounting screw | with hexagon socket |
Mounting screw tightening torque | 3,5 Nm |
Weight | 0,33 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber |