We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5812563160
Description
Standardization | ISO 5599-1 |
Cable length | 0.5 m |
Frame size | ISO 2 |
Switching principle | 5/3 |
Version | Spool valve |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber |
Protection class | IP67 |
Number of wires | 3-pin |
Type | Plug |
Nominal flow Qn | 2100 l/min |
Compressed air connection input | Base plate ISO 5599-1 |
Compressed air connection output | Base plate ISO 5599-1 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5812563160, get in touch with FAMAGA, the world's top vendor of mechanized equipment. Our company has advanced for more than ten years - these are ages of experience, which are outlined in the quality of merchandises and particular attention to each orderer. We esteem everyone, who joined with us - thus, our regular purchasers obtain the most beneficial purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such buyers, and we constantly compose new agreements. More than 600 affairs are settled per day, because FAMAGA works all over the world Germany, United Kingdom, Saudi Arabia, Antigua and Barbuda, Sri Lanka, Poland, Cyprus, Turkey, Italy, Syria, Kiribati, Monaco, Bhutan, Burkina Faso, Bangladesh, Kuwait, Macedonia, Mauritius, Romania, Liberia, Tajikistan, Egypt, Qatar, Panama, Belarus, Sweden, Yemen, Malaysia, Jordan, United States, Iceland, Argentina, Latvia, Nigeria, Albania, Suriname, Mexico, Central African Republic, Samoa, Cape Verde, Guatemala, Angola, Nepal, Dominica, Switzerland, Brunei. A well-shaped logistics network and a partnership network assist us to send our units anywhere in the planet on-time without undermining product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the sphere of factory-made equipment.
All items from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are happy that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically innovative industrial equipment so as stay in control.
To inquire or make a request, contact us or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve |
Sealing principle | Soft sealing |
Blocking principle | Single base plate principle |
Connection type | Plate connection |
Standards | ISO 5599-1, ISO 2 |
Working pressure min./max. | See table |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 2100 l/min |
Flow conductance C | 8,9 l/(s*bar) |
Protection class with connection | IP67 |
Protective circuit | Z-diode |
Reverse polarity protection | Protected against polarity reversal |
LED status display | Green |
Duty cycle | 100 % |
Typ. switch-on time | 14 ms |
Typ. switch-off time | 28 ms |
Mounting screw | with hexagon socket |
Mounting screw tightening torque | 3,5 Nm |
Weight | 0,33 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber |