We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5794425220
Description
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 520 l/min |
Compressed air connection input | Ø 6x1 |
Compressed air connection output | Ø 6x1 |
Operational voltage AC at 50 Hz | 24 V |
Operational voltage AC at 60 Hz | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5794425220, get in touch with FAMAGA, the world's influential company of machine made equipment. Our company has advanced for more than ten years - these are years of experience, which are symbolized in the quality of products and personalseparate attention to each purchaser. We respect everyone, who engaged with us - thus, our regular clients bring in the most attractive purchase conditions and discounts on the factory-made equipment market. Today, there are more than 3500 such customers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA works all over the earth Germany, United Kingdom, Costa Rica, Palestine, Brunei, Cape Verde, Chile, Ghana, Bolivia, Indonesia, Suriname, The Bahamas, Eswatini, Eritrea, Burma, Belarus, Bangladesh, India, Canada, Guyana, Burundi, Nicaragua, Latvia, Mozambique, Kuwait, Mexico, El Salvador, Turkmenistan, Pakistan, Mongolia, Kazakhstan, Russia, Uruguay, Bulgaria, Macedonia, Croatia, Luxembourg, East Timor, The Gambia, Burkina Faso, Finland, Moldova, Nepal, Lithuania. A well-developed logistics connection and a partnership network guide us to deliver our items anywhere in the world as soon as possible without undermining product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of industrial equipment.
All spare parts from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is ascending every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as stay in control.
To get some advice or order, contact us or write to the online chat on our official website. You can also direct a list of the needful equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Poppet valve |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Working pressure min./max. | 0,5 ... 8 bar |
Control pressure min./max. | 2 ... 8 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | See table |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 18 ms |
Typ. switch-off time | 16 ms |
Weight | 0,093 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
At an ambient temperature of 40 °C the max. working pressure is 10 bar . Versions with voltage of less than 50 V DC do not have a protective ground. The control pressure must be at least as high as the working pressure. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |