We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5791525220
Description
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 520 l/min |
Compressed air connection output | Ø 6x1 |
Operational voltage AC at 50 Hz | 24 V |
Operational voltage AC at 60 Hz | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 5791525220, contact FAMAGA, the world's prime supplier of streamlined equipment. Our company has existed for more than ten years - these are cycles of experience, which are represented in the quality of outcomes and special attention to each user. We appreciate everyone, who cooperated with us - therefore, our regular buyers procure the most helpful purchase forms and discounts on the manufacturing equipment market. At this moment, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 750 agreements are achieved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Sri Lanka, Netherlands, Uganda, Mali, Afghanistan, Suriname, Laos, Central African Republic, Sierra Leone, Antigua and Barbuda, Estonia, Ecuador, The Bahamas, Kazakhstan, Burma, Pakistan, Uzbekistan, Tunisia, Cyprus, Cameroon, New Zealand, Senegal, Equatorial Guinea, Iran, Andorra, Jamaica, Hungary, Ireland, Morocco, Tonga, Tajikistan, Dominica, Finland, Ukraine, Argentina, Jordan, Eswatini, Ghana, Slovakia, Mozambique, Algeria, Mauritania. A well-elaborated logistics series and a partnership network allow us to send our goods anywhere in the earth immediately without compromising product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the direction of machine made streamlined equipment.
All outputs from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is amounting every day. We are glad that clients choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To request or make a request, call us by phone or write to the online chat on our site. You can also forward a list of the necessary equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Poppet valve |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Working pressure min./max. | 0,5 ... 8 bar |
Control pressure min./max. | 2 ... 8 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | 520 l/min |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 18 ms |
Typ. switch-off time | 16 ms |
Weight | 0,093 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
At an ambient temperature of 40 °C the max. working pressure is 10 bar . Versions with voltage of less than 50 V DC do not have a protective ground. The control pressure must be at least as high as the working pressure. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |