We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821301703
Description
Parts | Micro oil-mist lubricator |
Type of filling | Manual oil filling |
Housing | Die cast zinc |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 1000 l/min |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0821301703, reach FAMAGA, the world's central provider of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of outputs and personalseparate attention to each buyer. We admire everyone, who collaborated with us - thus, our regular buyers procure the most helpful purchase forms and discounts on the manufacturing equipment market. Nowadays, there are more than 3500 such buyers, and we constantly sign new agreements. More than 750 agreements are achieved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Paraguay, Netherlands, Malawi, China, Singapore, Suriname, Oman, Mali, Ghana, Switzerland, Burkina Faso, Ireland, South Sudan, Djibouti, Croatia, Sweden, Algeria, Dominica, Nigeria, Benin, Malta, Finland, Eswatini, South Korea, Argentina, Costa Rica, Central African Republic, Togo, United Arab Emirates, Comoros, Mauritania, Mauritius, Madagascar, Mozambique, Latvia, Cyprus, El Salvador, Ukraine, Morocco, Bulgaria, Zimbabwe, Niger, Serbia, Botswana, Swaziland, Albania. A well-developed logistics chains and a partnership network help us to deliver our goods anywhere in the earth immediately without compromising product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is rising every day. We are glad that clients choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as stay in control.
To ask a question or make a request, get in touch with us or write a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Micro oil-mist lubricator, Can be assembled into blocks |
Parts | Micro oil-mist lubricator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Lubricator reservoir volume | 35 cm³ |
Type of filling | Manual oil filling |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Only approx. 10% of the preset drip quantity enters the compressed air system. oil filling not possible during operation. Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Oil dosing at 1000 l/min | 10-20 drops |
Material |
---|
Housing | Die cast zinc |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |