We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820027276
Description
Standardization | ISO 5599-1 |
Frame size | ISO 1 |
Actuating control | double solenoid |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber |
Protection class | IP65 |
Number of wires | 3-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 880 l/min |
Compressed air connection input | Base plate ISO 5599-1 |
Compressed air connection output | Base plate ISO 5599-1 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0820027276, make contact with FAMAGA, the world's central producer of industrial equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of goods and particular attention to each consumer. We cherish everyone, who worked with us - thus, our regular clients pick up the most helpful purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 3500 such clients, and we constantly make new agreements. More than 750 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Slovenia, Cuba, Ecuador, Estonia, India, The Bahamas, Indonesia, South Sudan, Togo, Malaysia, Uganda, Japan, Mexico, Lebanon, Costa Rica, Madagascar, Belarus, Nicaragua, Qatar, Turkey, East Timor, Chile, Suriname, Czech Republic, Monaco, Sudan, Vietnam, Latvia, Seychelles, El Salvador, Tajikistan, Cape Verde, Malta, Peru, Burundi, Croatia, Poland, Benin, Kazakhstan, United Arab Emirates, Pakistan, Iraq, Kuwait, Syria, Djibouti, Morocco. A well-shaped logistics chains and a partnership network allow us to ship our units anywhere in the earth promptly without damaging product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only experts, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as stay in control.
To inquire or book, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Sealing principle | Soft sealing |
Blocking principle | Single base plate principle |
Connection type | Plate connection |
Standards | ISO 5599-1, ISO 1 |
Working pressure min./max. | See table |
Control pressure min./max. | 2,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 880 l/min |
Protection class with connection | IP65 |
LED status display | Yellow |
Nominal resistance | 1480 Ω |
Duty cycle | 100 % |
Typ. switch-on time | See table |
Typ. switch-off time | See table |
Mounting screw | M5 with hexagon socket |
Mounting screw tightening torque | 2,2 Nm |
Weight | 0,31 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber |
Front plate | Polyamide |