We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820060797
Description
Actuating control | single solenoid |
Return type | With spring/air spring return |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Connector standard | DIN EN 60947-5-2 |
Protection class | IP65 |
Number of wires | 4-pin |
Port size | M8 |
Type | Plug |
Nominal flow Qn | 800 l/min |
Compressed air connection output | G 1/8 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0820060797, reach FAMAGA, the world's dominant supplier of mechanized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are portrayed in the quality of outcomes and special attention to each orderer. We praise everyone, who collaborated with us - hence, our regular purchasers receive the most flexible purchase forms and discounts on the industrial equipment market. Now, there are more than 4 thousand such buyers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Benin, Bosnia and Herzegovina, The Bahamas, Mauritius, United States, Zambia, Burkina Faso, Liechtenstein, Romania, Syria, Samoa, Turkey, Iceland, Haiti, Monaco, Burundi, Fiji, Brunei, Finland, Latvia, Ireland, East Timor, Kuwait, Cyprus, Malta, Poland, Chile, Guyana, Sudan, Bolivia, The Gambia, South Sudan, Jamaica, Israel, Afghanistan, Djibouti, Tanzania, Botswana, Tajikistan, Morocco, Equatorial Guinea, Estonia, Uganda. A well-elaborated logistics network and a partnership network let us to dispatch our products anywhere in the planet with no delay without compromising product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the range of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are happy that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To request or make a request, contact us or write a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Blocking principle | Plate principle |
Working pressure min./max. | -0,9 ... 10 bar |
Control pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Nominal flow Qn | 800 l/min |
Connector standard | DIN EN 60947-5-2 |
Protection class acc. to DIN EN 61140 Electrically | Class III |
Protection class with connection | IP65 |
LED status display | Yellow |
Duty cycle | 100 % |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Polyurethane |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, nickel-plated chrome-plated |