We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820062201
Description
Switching principle | 2x3/2 |
Version | Spool valve, positive overlapping |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Nominal flow Qn | 400 l/min |
DC operating voltage | 24 V |
For series | HF04,LP04,HF04-XF |
Activation | Electrically |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0820062201, catch up with FAMAGA, the world's leading supplier of streamlined equipment. Our company has existed for more than ten years - these are ages of experience, which are outlined in the quality of goods and personalseparate attention to each user. We praise everyone, who engaged with us - so, our regular customers receive the most flexible purchase terms and discounts on the industrial equipment market. At present, there are more than 3500 such customers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the globe Germany, United Kingdom, Egypt, Italy, South Sudan, Tajikistan, Mauritania, Namibia, Seychelles, Burundi, Monaco, Slovenia, Haiti, United States, New Zealand, Lithuania, Oman, Fiji, Cameroon, Angola, Nepal, Benin, Yemen, Belarus, Zimbabwe, Sweden, Switzerland, Denmark, Mexico, Kyrgyzstan, Russia, Sierra Leone, Cape Verde, Croatia, The Gambia, Qatar, Libya, Brunei, Luxembourg, Macedonia, Guatemala, Tunisia, Syria, Bosnia and Herzegovina, Albania, Algeria. A well-developed logistics series and a partnership network guide us to send our elements anywhere in the globe on-time without undermining product quality.
A specific source of honor for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is increasing every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To consult or book, contact us or send a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | External, Internal |
Sealing principle | Soft sealing |
Blocking principle | Double base plate principle |
Working pressure min./max. | -0,9 ... 10 bar |
Control pressure min./max. | 3 ... 8 bar |
Ambient temperature min./max. | -5 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 400 l/min |
Pilot control exhaust | With collective pilot air exhaust |
Protection class with connection | IP65 |
Protective circuit | Z-diode |
Reverse polarity protection | Protected against polarity reversal |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | 13 ms |
Typ. switch-off time | 20 ms |
mounting screws | cross recessed DIN EN ISO 4757-Z0 |
Mounting screw tightening torque | 0,25 Nm |
Weight | 0,048 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pilot type (external/internal) is not implemented in the valve, but in the end plate of the valve system. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |