We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472021307
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 25 mm |
Piston rod thread | M10x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 200 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 7472021307, catch up with FAMAGA, the world's chief vendor of streamlined equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of outcomes and private attention to each customer. We cherish everyone, who conspired with us - therefore, our regular consumers pick up the most beneficial purchase forms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such consumers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the planet Germany, United Kingdom, Iraq, Belarus, Swaziland, Central African Republic, Congo, Botswana, Romania, Norway, Malta, Nepal, Tajikistan, Lithuania, Kazakhstan, El Salvador, Rwanda, Guatemala, Liberia, Zimbabwe, Zambia, Mongolia, Uruguay, Turkey, North Korea, Nicaragua, Ukraine, Sierra Leone, Antigua and Barbuda, Israel, Argentina, Indonesia, Iceland, India, Hungary, Andorra, Bosnia and Herzegovina, Cyprus, Slovakia, Panama. A well-elaborated logistics series and a partnership network allow us to dispatch our units anywhere in the planet immediately without damaging product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the sphere of manufacturing equipment.
All spare parts from FAMAGA are verified - we are responsible for the outcome of our work. Now, more than 10 million units of products have been supplied, and this amount is ascending every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically innovative industrial equipment so as stay in control.
To get some advice or order, phone us or write a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |