We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822496304
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M12x1,25 |
Standardization | NFE 49004 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822496304, make contact with FAMAGA, the world's principle producer of industrialized equipment. Our company has existed for more than ten years - these are years of experience, which are depicted in the quality of spare parts and private attention to each orderer. We appreciate everyone, who liased with us - thus, our regular customers bring in the most flexible purchase forms and discounts on the factory-made equipment market. Today, there are more than 4500 such consumers, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Canada, Myanmar, Burundi, Liechtenstein, Georgia, Norway, South Sudan, Zimbabwe, Peru, Bulgaria, Czech Republic, Equatorial Guinea, Monaco, Tunisia, Jordan, Mauritania, Ecuador, Gambia, Greece, Zambia, Sudan, Uganda, India, Switzerland, Libya, United States, Turkey, Benin, Israel, Jamaica, Bosnia and Herzegovina, Ukraine, Central African Republic, Australia, Austria, Chile, Afghanistan, Malta, Latvia. A advanced logistics link and a partnership network let us to deliver our goods anywhere in the globe promptly without discrediting product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of manufacturing equipment.
All goods from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are happy that consumers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To ask a question or book, phone us or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |