We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020729
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412020729, communicate with FAMAGA, the world's prime producer of streamlined equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and personalseparate attention to each user. We appreciate everyone, who worked with us - therefore, our regular clients procure the most flexible purchase conditions and discounts on the machine made streamlined equipment market. Now, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Denmark, Malta, Portugal, Vietnam, Mongolia, Malaysia, Bhutan, Myanmar, Guatemala, Uganda, Turkey, The Gambia, Norway, Eswatini, Malawi, Afghanistan, Saudi Arabia, Tonga, Antigua and Barbuda, Hungary, Slovakia, Liechtenstein, Guyana, Mali, Peru, Thailand, Mozambique, Sudan, Poland, Montenegro, Switzerland, North Korea, Zambia, Belize, Iraq, Australia, Kazakhstan, Morocco, Ukraine, Suriname. A well-developed logistics series and a partnership network allow us to conduct our goods anywhere in the world immediately without discrediting product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All outcomes from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this amount is increasing every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as keep on top of it.
To inquire or order, call us by phone or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Polyamide fiber-glass reinforced |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Guide bushing | Steel |