We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226628010
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 495 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 5226628010, reach FAMAGA, the world's the best producer of mechanized equipment. Our company has operated for more than ten years - these are cycles of experience, which are depicted in the quality of products and particular attention to each buyer. We understand everyone, who engaged with us - therefore, our regular clients obtain the most helpful purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Congo, Guyana, Hungary, Brazil, Poland, Senegal, Egypt, Gambia, Norway, East Timor, Belize, Azerbaijan, The Bahamas, Chad, Botswana, Denmark, Kyrgyzstan, Israel, Tunisia, Ukraine, Uzbekistan, Slovakia, Namibia, Iraq, Equatorial Guinea, Mongolia, Luxembourg, New Zealand, Yemen, Liechtenstein, Cameroon, Mozambique, Niger, Thailand, Lithuania, Peru, Bolivia, North Korea, Macedonia, Libya, India. A advanced logistics network and a partnership network allow us to conduct our units anywhere in the earth with no delay without compromising product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only experts, who already have experience in the direction of factory-made equipment.
All goods from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is amounting every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, contact us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |