We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
R422001259 (CCI-DA-080-0150-00412241100000) AVENTICS - Kompaktzylinder ISO 21287, Serie CCI
Part number
R422001259
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R422001259 (CCI-DA-080-0150-00412241100000) AVENTICS - Kompaktzylinder ISO 21287, Serie CCI R422001259, call FAMAGA, the world's chief producer of manufacturing equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and particular attention to each consumer. We esteem everyone, who worked with us - so, our regular consumers obtain the most convenient purchase forms and discounts on the industrial equipment market. At present, there are more than 4 thousand such consumers, and we constantly sign new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Eritrea, Palestine, Malta, Colombia, Indonesia, Mexico, Turkey, Mauritius, Kazakhstan, Jamaica, Albania, Canada, Panama, Qatar, Cameroon, The Gambia, Monaco, Burma, Kyrgyzstan, Luxembourg, Swaziland, Brunei, Bolivia, Samoa, Philippines, Latvia, Mozambique, El Salvador, Ecuador, Egypt, Brazil, The Bahamas, Equatorial Guinea, Malaysia, Togo, Thailand, Afghanistan, Haiti, Burkina Faso, Slovakia, Lithuania, China, Pakistan, Nepal, Benin. A well-shaped logistics bond and a partnership network cheer us to dispatch our products anywhere in the globe promptly without undermining product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of factory-made equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this bulk is rising every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To consult or book, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 21287 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. With cylinders with external thread extension, dimension "A" is increased by the value of the thread extension. With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Scraper | Polyurethane |