We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing Aventics (brand of Emerson) R480176749, call FAMAGA, the world's prime supplier of mechanized equipment. Our company has existed for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and special attention to each buyer. We value everyone, who conspired with us - hence, our regular customers receive the most attractive purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 750 affairs are settled per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Guyana, Togo, Japan, Rwanda, Iraq, Eswatini, Cape Verde, Benin, Costa Rica, Turkmenistan, Eritrea, Comoros, Colombia, Palestine, Belarus, Algeria, East Timor, Mali, Yemen, Libya, Russia, Namibia, Uzbekistan, Croatia, Haiti, Qatar, Azerbaijan, Mongolia, Dominica, Uruguay, Djibouti, Swaziland, Bolivia, Tajikistan, Jamaica, Mozambique, Egypt, Iran, Pakistan, Finland, Afghanistan, China, Panama, Nigeria, Madagascar, Laos. A well-built logistics series and a partnership network allow us to dispatch our products anywhere in the world immediately without compromising product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as keep on top of it.
To consult or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |