We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480148020
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 400 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480148020, connect FAMAGA, the world's key retailer of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and personalseparate attention to each consumer. We praise everyone, who worked with us - thus, our regular consumers procure the most flexible purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 4500 such buyers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Liechtenstein, Kiribati, Gambia, Mozambique, Tajikistan, Vietnam, Nigeria, Moldova, Iraq, Chad, Austria, Burma, Colombia, Israel, Zimbabwe, Equatorial Guinea, Benin, Thailand, Mexico, Burundi, United States, Tonga, Sierra Leone, Denmark, Russia, Albania, Bangladesh, Dominica, India, Iran, Nicaragua, Macedonia, Fiji, Malta, Libya, Chile, Morocco, Namibia, Greece, Ghana, Armenia, Tanzania, Serbia, Bulgaria, Finland. A well-built logistics bond and a partnership network allow us to dispatch our goods anywhere in the globe as soon as possible without discrediting product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To ask a question or place an order, contact us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |