We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480146313
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480146313, reach FAMAGA, the world's central producer of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of merchandises and particular attention to each client. We admire everyone, who cooperated with us - hence, our regular consumers procure the most attractive purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such clients, and we constantly make new agreements. More than 750 proceedings are resolved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Fiji, China, The Bahamas, Czech Republic, Bosnia and Herzegovina, Norway, Luxembourg, Ireland, Zimbabwe, Japan, Afghanistan, Canada, Lebanon, South Korea, Sierra Leone, Costa Rica, Argentina, Kuwait, Austria, Angola, Moldova, Qatar, Tajikistan, Panama, Belize, Zambia, East Timor, Uganda, Cape Verde, Nepal, Liechtenstein, Djibouti, Azerbaijan, Croatia, Comoros, Belarus, New Zealand, Benin, Pakistan, Madagascar, Estonia, Vietnam, Mongolia, Brunei, Lithuania. A advanced logistics connection and a partnership network guide us to conduct our goods anywhere in the planet immediately without disreputing product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the direction of manufacturing equipment.
All goods from FAMAGA are verified - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or send a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |