We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412014259
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412014259, catch up with FAMAGA, the world's principle vendor of industrialized equipment. Our company has lasted for more than ten years - these are ages of experience, which are outlined in the quality of products and special attention to each consumer. We esteem everyone, who engaged with us - thus, our regular purchasers obtain the most desirable purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA works all over the globe Germany, United Kingdom, El Salvador, Luxembourg, Fiji, Austria, Sri Lanka, Italy, Macedonia, Albania, Mauritania, Bahamas, Guyana, Indonesia, Romania, Bhutan, Seychelles, Honduras, Tajikistan, Niger, Suriname, Montenegro, Jamaica, Slovakia, United Arab Emirates, Chad, Switzerland, Antigua and Barbuda, Mali, Haiti, Equatorial Guinea, Serbia, Sweden, Belize, Estonia, Burundi, Cyprus, Latvia, Poland, Uganda, Guatemala, United States, Yemen, Peru, Togo, Lithuania, Kuwait, Namibia. A well-developed logistics link and a partnership network guide us to dispatch our goods anywhere in the planet on-time without damaging product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is rising every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To ask a question or order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |