We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412014257
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 25 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412014257, catch up with FAMAGA, the world's central distributor of mechanized equipment. Our company has functioned for more than ten years - these are ages of experience, which are represented in the quality of spare parts and personalseparate attention to each purchaser. We esteem everyone, who cooperated with us - therefore, our regular consumers procure the most favorable purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such customers, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, Jordan, Mongolia, Ecuador, Latvia, Portugal, Congo, China, Lithuania, Hungary, Palestine, Liechtenstein, Senegal, Saudi Arabia, Romania, Paraguay, Guinea, Lebanon, Mauritania, Central African Republic, Brunei, Malta, Belarus, Norway, Monaco, Ukraine, Jamaica, Benin, Sierra Leone, Haiti, Laos, Uganda, Angola, Iceland, The Gambia, Eswatini, Montenegro, Czech Republic, East Timor, Slovakia, Brazil, Thailand, Zambia, Kiribati, Pakistan, Australia, United States. A advanced logistics network and a partnership network guide us to send our elements anywhere in the earth on-time without disreputing product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the sphere of machine made streamlined equipment.
All outputs from FAMAGA are verified - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is growing every day. We are pleased that users choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as keep on top of it.
To consult or make a request, contact us or send a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |