We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480148071
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 200 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480148071, reach FAMAGA, the world's chief company of factory-made equipment. Our company has operated for more than ten years - these are years of experience, which are described in the quality of merchandises and private attention to each orderer. We value everyone, who engaged with us - thus, our regular customers pick up the most desirable purchase conditions and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4 thousand such consumers, and we constantly arrange new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, Antigua and Barbuda, Laos, Belize, Madagascar, Congo, France, Cape Verde, Greece, Israel, Belgium, Azerbaijan, Turkey, Chad, Eritrea, Austria, Bhutan, Burma, Belarus, Uganda, Yemen, North Korea, Burkina Faso, Kenya, The Bahamas, Macedonia, Philippines, United States, Bosnia and Herzegovina, Zimbabwe, Zambia, Bangladesh, The Gambia, Mongolia, Georgia, Tanzania, Bulgaria, Libya, Mauritius, Chile, Niger, Iran, Lithuania, India, Botswana, New Zealand, Ireland. A well-built logistics network and a partnership network cheer us to dispatch our units anywhere in the earth as soon as possible without damaging product quality.
A special source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only experts, who already have experience in the direction of factory-made equipment.
All goods from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is amounting every day. We are glad that customers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as keep on top of it.
To ask a question or book, contact us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |