We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412007016
Description
Parts | Filter |
Condensate drain | fully automatic, open without pressure |
filter porosity | 5 µm |
inspection glass | with window |
Housing | Polyamide |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 3500 l/min |
Compressed air connection | G 1/2 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412007016, get in touch with FAMAGA, the world's dominant provider of machine made equipment. Our company has lasted for more than ten years - these are ages of experience, which are described in the quality of merchandises and individual attention to each consumer. We admire everyone, who joined with us - so, our regular consumers procure the most convenient purchase conditions and discounts on the factory-made equipment market. Now, there are more than 3500 such clients, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Venezuela, Bolivia, Belarus, United Arab Emirates, Bangladesh, Netherlands, Japan, Moldova, Poland, Yemen, Guyana, Cyprus, Haiti, Jordan, Sweden, Fiji, Bulgaria, Romania, Algeria, Cape Verde, Senegal, Samoa, Malta, Botswana, Kiribati, Paraguay, The Gambia, Burkina Faso, Russia, Turkmenistan, Kenya, Mauritania, Ukraine, Albania, Mauritius, Morocco, Philippines, Indonesia, Latvia, Tajikistan, South Korea, United States, Czech Republic, Georgia, Austria. A well-developed logistics connection and a partnership network help us to dispatch our units anywhere in the world as soon as possible without undermining product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of manufacturing equipment.
All items from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are happy that buyers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as stay in control.
To ask a question or book, phone us or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Standard filter, Can be assembled into blocks |
Parts | Filter |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Filter reservoir volume | 49 cm³ |
Filter element | exchangeable |
filter porosity | 5 µm |
Condensate drain | See table |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |