We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822010657
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M6 |
Stroke | 50 mm |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822010657, communicate with FAMAGA, the world's primary retailer of industrial equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of products and personalseparate attention to each customer. We value everyone, who collaborated with us - thus, our regular purchasers pick up the most beneficial purchase forms and discounts on the factory-made equipment market. Today, there are more than 3500 such purchasers, and we constantly make new agreements. More than 600 proceedings are resolved per day, because FAMAGA works all over the globe Germany, United Kingdom, Comoros, Chad, Tanzania, Costa Rica, Haiti, Togo, Iceland, Guatemala, India, Cuba, Bulgaria, Eritrea, Romania, Bhutan, Canada, East Timor, Mali, Seychelles, Mozambique, Malaysia, Estonia, Peru, Vietnam, Mexico, Poland, El Salvador, Belize, Chile, South Sudan, Guyana, Albania, Bolivia, Belarus, Djibouti, Samoa, Iraq, Dominica, Andorra, Turkey, Jamaica, Austria, Burkina Faso, Indonesia, Panama, Kuwait. A well-built logistics system and a partnership network assist us to deliver our units anywhere in the planet on-time without disreputing product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. Now, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are glad that buyers choose FAMAGA again and again, and we are eager to make more developed and technologically modern industrial equipment so as stay in control.
To request or make a request, phone us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Other versions can be ordered from AVENTICS sales offices. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Piston | Nitrile rubber |
Front cover | Brass Aluminum |
End cover | Aluminum |
Scraper | Polyurethane |