We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412007189
Description
Parts | Filter pressure regulator |
Condensate drain | semi-automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 25 µm |
lockable | lockable |
Housing | Polyamide |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 5100 l/min |
Compressed air connection | G 1/2 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412007189, catch up with FAMAGA, the world's influential vendor of factory-made equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of goods and individual attention to each user. We understand everyone, who joined with us - hence, our regular purchasers procure the most favorable purchase forms and discounts on the industrial equipment market. At present, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Guyana, Fiji, Sri Lanka, Swaziland, Haiti, Cyprus, Samoa, Turkmenistan, Serbia, Iceland, The Bahamas, Luxembourg, Estonia, Netherlands, Kuwait, Guinea, Brunei, Angola, Montenegro, Mauritius, New Zealand, Panama, Malaysia, Tonga, Czech Republic, El Salvador, Algeria, Switzerland, Bosnia and Herzegovina, Croatia, Austria, Poland, East Timor, Belarus, Chile, Sweden, Moldova, Finland, Burkina Faso, Tajikistan, Mexico. A advanced logistics series and a partnership network let us to dispatch our products anywhere in the globe with no delay without compromising product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of manufacturing equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this amount is amounting every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To inquire or order, get in touch with us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 5100 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | 0,5 ... 8 bar |
Pressure supply | single |
Filter reservoir volume | 49 cm³ |
Filter element | exchangeable |
Condensate drain | semi-automatic, open without pressure |
Weight | 0,797 kg |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 7 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Die cast zinc |
Filter insert | Polyethylene |