We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480680403
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 25 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480680403, communicate with FAMAGA, the world's key company of streamlined equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of merchandises and private attention to each consumer. We understand everyone, who conspired with us - therefore, our regular purchasers receive the most convenient purchase terms and discounts on the industrial equipment market. At this moment, there are more than 3500 such consumers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, Dominican Republic, Georgia, Philippines, Honduras, East Timor, Colombia, China, Mauritania, Tunisia, United States, Argentina, The Gambia, Benin, Botswana, Russia, Mauritius, Uzbekistan, Dominica, Uruguay, Japan, Fiji, Iraq, Cape Verde, Togo, Macedonia, Senegal, Qatar, El Salvador, Serbia, Jamaica, Bolivia, Iran, Indonesia, Burundi, Afghanistan, Austria, Tajikistan, Kyrgyzstan, Egypt, Latvia, Cyprus, Kuwait. A well-built logistics series and a partnership network allow us to ship our goods anywhere in the world with no delay without damaging product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the direction of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this number is ascending every day. We are proud that customers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as stay in control.
To get some advice or make a request, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |