We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822394005
Description
Piston rod modification | Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M8 |
Standardization | NFE 49004 |
Stroke | 30 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822394005, communicate with FAMAGA, the world's foremost distributor of industrialized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and particular attention to each user. We esteem everyone, who conspired with us - therefore, our regular consumers receive the most desirable purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4000 such consumers, and we constantly compose new agreements. More than 700 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Myanmar, Malta, Tonga, Bhutan, Algeria, Guinea, Nigeria, Israel, Croatia, Niger, Guatemala, Cameroon, Brazil, Moldova, Iraq, Fiji, Sudan, Syria, Uzbekistan, Belize, Saudi Arabia, Iceland, India, Cape Verde, Kuwait, Eswatini, Antigua and Barbuda, Zambia, North Korea, Kiribati, Suriname, Turkey, Georgia, Montenegro, Madagascar, Jordan, Comoros, Hungary, Bulgaria, Tanzania, New Zealand. A well-elaborated logistics connection and a partnership network cheer us to ship our elements anywhere in the planet promptly without discrediting product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are glad that consumers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, contact us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |