We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822384008
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 200 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822384008, get in touch with FAMAGA, the world's leading distributor of mechanized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of spare parts and personalseparate attention to each user. We esteem everyone, who liased with us - therefore, our regular clients accept the most desirable purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4000 such clients, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, India, Nigeria, Portugal, Oman, Ecuador, Canada, Niger, Turkey, Cape Verde, Ghana, Latvia, Kiribati, Kazakhstan, Austria, Cyprus, North Korea, Tanzania, Antigua and Barbuda, Slovakia, Gambia, The Bahamas, Moldova, Ireland, Turkmenistan, Tajikistan, Laos, Ukraine, Israel, Armenia, Argentina, Belize, Iraq, Togo, Sudan, East Timor, Kenya, Suriname, Senegal, Equatorial Guinea, Zambia, Jamaica. A well-shaped logistics series and a partnership network let us to deliver our units anywhere in the planet promptly without damaging product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.
To inquire or book, contact us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |