We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1332505000
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Polyurethane |
Corrosion resistance | corrosion-resistant |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 1332505000, call FAMAGA, the world's chief producer of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are symbolized in the quality of items and private attention to each purchaser. We cherish everyone, who collaborated with us - so, our regular customers obtain the most helpful purchase terms and discounts on the factory-made equipment market. At present, there are more than 4 thousand such consumers, and we constantly arrange new agreements. More than 750 agreements are achieved per day, because FAMAGA works all over the planet Germany, United Kingdom, Azerbaijan, Estonia, Nigeria, Russia, Papua New Guinea, Lebanon, Cyprus, Ireland, Benin, Czech Republic, Nepal, Kyrgyzstan, Peru, Cape Verde, Romania, Macedonia, Bhutan, Panama, Sierra Leone, Burundi, Angola, Costa Rica, Comoros, Netherlands, Dominica, Eswatini, Bulgaria, Vietnam, Switzerland, Malaysia, Belize, Serbia, Cameroon, Morocco, Yemen, Indonesia, Georgia, Afghanistan, Poland, Thailand, Togo, Bangladesh. A well-built logistics connection and a partnership network help us to send our elements anywhere in the planet as soon as possible without damaging product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the direction of manufacturing equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this amount is growing every day. We are happy that customers choose FAMAGA again and again, and we are glad to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To consult or book, get in touch with us or send a message to the online chat on our site. You can also direct a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |