We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480680362
Description
Piston rod modification | non-rotating |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 200 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480680362, contact FAMAGA, the world's foremost vendor of manufacturing equipment. Our company has operated for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each consumer. We understand everyone, who joined with us - thus, our regular clients get the most flexible purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such buyers, and we constantly sign new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Latvia, South Africa, Cambodia, Montenegro, Georgia, Ireland, Eswatini, Uganda, Saudi Arabia, Romania, Norway, Canada, Palestine, Hungary, Tajikistan, Mauritania, Bangladesh, Kiribati, Macedonia, Brunei, Senegal, China, Brazil, Switzerland, Rwanda, East Timor, Iceland, Equatorial Guinea, Algeria, Lithuania, Albania, Uruguay, Indonesia, Burundi, Nepal, Egypt, Argentina, Namibia, Benin, Thailand, Pakistan, Mongolia, Chile, Sierra Leone, Austria. A well-elaborated logistics bond and a partnership network let us to send our items anywhere in the world on-time without disreputing product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this amount is rising every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To inquire or order, contact us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders can be generated in the Internet configurator. ATEX ID: II 2G c IIB T4 II 2D c IP65 T125°C X The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |