We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822334404
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 80 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822334404, connect FAMAGA, the world's major retailer of streamlined equipment. Our company has progressed for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each customer. We understand everyone, who conspired with us - hence, our regular clients procure the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4500 such customers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Montenegro, Sri Lanka, Italy, Brunei, Cameroon, Niger, Vietnam, East Timor, Japan, Saudi Arabia, Bolivia, Bhutan, Papua New Guinea, Palestine, South Korea, Colombia, Hungary, Mauritius, Cape Verde, China, Turkey, Swaziland, Armenia, Egypt, Ukraine, Mozambique, Equatorial Guinea, Peru, Haiti, Zimbabwe, Pakistan, Lithuania, Dominica, Senegal, New Zealand, Fiji, Chile, Ireland, United States, Moldova, Nepal, Namibia, Albania, Burkina Faso, The Gambia, Latvia. A well-elaborated logistics series and a partnership network cheer us to conduct our items anywhere in the world as soon as possible without discrediting product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are proud that customers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as stay in control.
To consult or place an order, call us by phone or write to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |