We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472408363
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 160 mm |
Piston rod thread | M36x2 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 100 mm |
Sealing material | Polyurethane |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 7472408363, reach FAMAGA, the world's major producer of industrial equipment. Our company has functioned for more than ten years - these are cycles of experience, which are represented in the quality of merchandises and special attention to each consumer. We praise everyone, who worked with us - therefore, our regular purchasers get the most helpful purchase terms and discounts on the manufacturing equipment market. At present, there are more than 3500 such consumers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Oman, Cyprus, Panama, Eritrea, Rwanda, Sri Lanka, Madagascar, Antigua and Barbuda, Finland, Laos, Brunei, Nigeria, Bhutan, Bolivia, Ukraine, Djibouti, Romania, Malaysia, Nepal, Grenada, Kuwait, Philippines, Croatia, Australia, Netherlands, Senegal, Serbia, Dominica, Peru, Zambia, Costa Rica, Sudan, Estonia, Vietnam, Cape Verde, United States, Angola, South Sudan, Armenia, Tajikistan, Bosnia and Herzegovina, Luxembourg, Iraq, Syria, North Korea, Belarus, Macedonia. A well-elaborated logistics bond and a partnership network allow us to dispatch our units anywhere in the world promptly without discrediting product quality.
A specific source of honor for FAMAGA is its team members, each of whom contributes to our work. We request into our team only experts, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this quantity is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To consult or make a request, call us by phone or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |