We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472411971
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 160 mm |
Piston rod thread | M36x2 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 300 mm |
Sealing material | Polyurethane |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 7472411971, reach FAMAGA, the world's main retailer of streamlined equipment. Our company has progressed for more than ten years - these are cycles of experience, which are depicted in the quality of items and private attention to each purchaser. We admire everyone, who joined with us - hence, our regular clients accept the most desirable purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such clients, and we constantly form new agreements. More than 750 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Turkmenistan, Czech Republic, Sierra Leone, Bosnia and Herzegovina, Burundi, Dominica, Saudi Arabia, The Gambia, Ukraine, Georgia, Seychelles, Burma, Romania, Malawi, Guinea, Algeria, Comoros, Sudan, Equatorial Guinea, Argentina, Kazakhstan, Jordan, El Salvador, Israel, Poland, Cameroon, Austria, Paraguay, Tunisia, Fiji, Nigeria, Jamaica, Macedonia, Uruguay, North Korea, Australia, Denmark, Iran, Bulgaria, Costa Rica, Greece, Tonga. A well-developed logistics connection and a partnership network let us to deliver our goods anywhere in the planet with no delay without undermining product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only experts, who already have experience in the direction of manufacturing equipment.
All merchandises from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is ascending every day. We are happy that clients choose FAMAGA again and again, and we strive to make more progressive and technologically advanced industrial equipment so as keep on top of it.
To get some advice or place an order, phone us or write a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |