We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412006078
Description
Parts | Diaphragm-type dryer |
Housing | Polyamide |
Reservoir | Aluminum |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 50 l/min |
Compressed air connection | G 3/8 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412006078, make contact with FAMAGA, the world's primary vendor of mechanized equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of goods and special attention to each user. We understand everyone, who engaged with us - hence, our regular consumers pick up the most desirable purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4000 such clients, and we constantly make new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Burundi, Ghana, Cambodia, Italy, Malta, Haiti, Turkmenistan, Malaysia, Nigeria, Qatar, Madagascar, Saudi Arabia, The Bahamas, Uzbekistan, Chad, Oman, Indonesia, Bosnia and Herzegovina, Grenada, Chile, Turkey, North Korea, Philippines, Paraguay, Afghanistan, Denmark, Senegal, Bulgaria, Andorra, The Gambia, Lithuania, Cyprus, Iceland, Equatorial Guinea, Tanzania, Bangladesh, Ukraine, Uganda, Australia, Antigua and Barbuda, Brazil, Norway. A advanced logistics network and a partnership network assist us to dispatch our items anywhere in the globe on-time without compromising product quality.
A particular source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of manufacturing equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is rising every day. We are happy that purchasers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To ask a question or book, phone us or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Diaphragm-type dryer |
Parts | Diaphragm-type dryer |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 4 ... 12,5 bar |
Ambient temperature min./max. | 2 ... 50 °C |
Medium temperature min./max. | 2 ... 50 °C |
Medium | Compressed air Neutral gases |
Filter element | not exchangeable |
Lowering pressure dew point | 20 °C |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Notice: air may not contain condensate purge air approx. 12% of nominal flow Qn Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Recommended pre-filtering μm | 5 / 0,01 µm |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seal | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Aluminum |