We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627314
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 160 mm |
Piston rod thread | M36x2 |
Standardization | ISO 15552 |
Stroke | 250 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480627314, get in touch with FAMAGA, the world's top vendor of industrial equipment. Our company has lasted for more than ten years - these are ages of experience, which are described in the quality of spare parts and private attention to each buyer. We respect everyone, who collaborated with us - so, our regular consumers obtain the most convenient purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such clients, and we constantly sign new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Barbados, Djibouti, Czech Republic, Cuba, Cyprus, Saudi Arabia, Israel, Equatorial Guinea, Burma, Ecuador, Bhutan, Greece, Argentina, East Timor, Sudan, Ireland, Kiribati, Niger, Kuwait, Australia, Peru, Rwanda, Luxembourg, Montenegro, Poland, Liechtenstein, Hungary, Antigua and Barbuda, Philippines, Paraguay, Comoros, Tunisia, Azerbaijan, Iceland, Malta, India, Uruguay, Panama, Central African Republic, Ukraine, Syria, New Zealand, Jamaica, Slovakia, Togo. A well-shaped logistics series and a partnership network allow us to ship our units anywhere in the earth with no delay without disreputing product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the range of machine made streamlined equipment.
All spare parts from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To ask a question or book, contact us or write to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel |